25 Royalty-Free Audio Tracks for "Pressure Release"

Sound of unscrewing a gas canister and releasing the pressure from the gas coming out.

Air pressure release from a piece of mechanical equipment on an oil rig.

Pressure cooker with hot air and pressure release variations. Recorded with zoom h4nsp.

Studio recording of a 10'' inflatable stand-up surf board being deflated. I included a roughly designed version first, and the raw mono take. Format:wav 44khz 16bit mono. Gear:neumann tlm-102audiofuse interface.

This sound was made from a shaving cream can that was running out of shaving cream. It was edited to sound like an air pressure release sound. Use it as a hydraulic sound or whatever you want. Credit would be nice but is not required.

Stereo-recording of releasing airpressure through a small valve.

Water carbonater releasing pressure. Could be used for more sci-fi purposes.

A pressurized sound made from a very simple source - my own mouth. Filtering and stretching gives it a convincing effect of a hydraulic release. May be compatible with sounds of medical machines.

Studio-recording of pumping air with a bicyclepump and holding and releasing it with my thump, creating a funny sound.

Burst of air next to a mic. It was originally intended for a bullet hitting a ballistic vest, but it obviously can work for some kind of a pressure releasing sound too.

Opening a bottle of sparkling water.

Pneumatic nail gun being disconnected from a pressurized air line.

A hissing sound created by opening a bottle of soda.

I hold a carbonated can to my microphone and open it in two motions, one to release the pressure, and the other to open the hole the rest of the way. This was a 12oz (355ml) standard soda can (specifically moxie) held in my hand a few inches from the mic, with some slight ambient humming removed in audacity afterward.

The compression hiss as the soda machine fills the water with co2, then the pressure release valve kicks in.

This the valve releasing extra pressure when turning off an airbrush air compressor.

Like the door open but things are not reversed. Air affect is placed in front not behind for release of pressure.

This is a sample from the plug on the bottom of a shaving cream can getting pulled out and the resulting release of air pressure and shaving cream. If you're good enough at editing, you can make this into an explosion, a weapon, a hydraulic release, or some sort of gloopy lava bubbling sound, or anything else you can create with this. Feel free to use and edit this raw sample however you please. Credit would be nice but is not required. Recorded with a tascam dr07 disclaimer: potentially dangerous actions were performed to create this sound. I don't recommend attempting to recreate this and i'm not responsible for your actions.

Here are some percussive sounds of a thermal mug. I've put hot water in it, shaked it and pressed the valce button to release the pressurized air (that's the first pop). Then opening and closing it again several times. Nice percussive samples to cut out from this. Recorded with zoom h2.

Created with audacity from white noice and various filters. Sounds like low-pressure compressed air being released through a nozzle.

Safety valve opening and releasing steam when boiler goes high pressure. Industrial 1000 hp boiler. Recorded on a s9 samsung phone.

A sound i initially made for scp containment breach's ambiance sounds when i had first had the zoom h6 (2019 december, i regularly sound mod old games to gain learning experience of the encoding, the resampling quality of that engine and the internals and since then i've improved in many places). The actual recording is the pressure sound of water going down its sinkhole, filtered as to "muffle" the sound due to the design being that behind a wall and catching the attention of the player likely leading to their death by scp-173 but also was done to boost its bass and it gives a sort of comfortable, releasing feel.

Here's a sound of me opening a beer can. The stages are separated, but you can edit them together if you want to have the initial pressure release and the rest of the procedure. Or you could take each part separately and make something completely unexpected from this recording. Captrued using behringer b-1 microphone into presonus studio 24c interace into audacity using pipewire on arch linux at 48khz 24-bit. The audio is unprocessed, each bit straight from the adc. Cheers!.

This morning i woke up to the sound of a city crew jackhammering concrete just outside my window. I grabbed my h2 and recorded for a while. This file is an edit of the full recording. It contains two bursts of jackhammering, one fairly short and one longer. The background noise is the sound of the air compressor. Toward the end the compressor is turned off and the last of the pressure is released by the jackhammer as it sort of "putters out". This last bit is a bit unique.

Gravação em estúdio, utilizado microfone condensador, de um balão esvaziando. Gravado para a disciplina de captação e edição de áudio do curso rádio, tv e internet, universidade anhembi morumbi. São paulo-sp. Brasil. --------------------------------------. Recording in empty a balloon deflating. Used condenser microphone. Recorded for discipline of capture and editing of audio - course: radio, tv and internet. Universidade anhembi morumbi. São paulo - sp. Brazil.